Metal Frames & Accessories

Application
The main supporting section to fix plasterboard

Dimensions
80 x 26 x 51 x 3660 MM

Application
Primary section to support the ceiling section

Dimensions
15 x 45 x 15 x 3660 MM

Application
Fix around walls / partitions

Dimensions
20 x 28 x 30 x 3660 MM

Application
To provide suspensions from the structural soffit

Dimensions
25 x 10 x 3660 MM

Application
Used as the vertical support in wall framing.

Dimensions
92 x 34 x 36 x 0.5 x 3050 / 3660 MM   48 x 34 x 36 x 0.5 x 3050 / 3660 MM
146 x 34 x 36 x 0.5 x 3660 MM   70 x 34 x 36 x 0.5 x 3050 / 3660 MM

Application
Designed for securing wall studs at floor and ceiling junctions. Fixed to floor and ceiling to accommodate Gypsteel ULTRA® studs

Dimensions
50 x 32 x 32 x 0.5 x 3660 MM              94 x 32 x 32 x 0.5 x 3660 MM
72 x 32 x 32 x 0.5 x 3660 MM              148 x 32 x 32 x 0.5 x 3660 MM

Application
Perforated galvanized metal bead for reinforcing external 90° angles where maximum protection is required

Dimensions
25 x 25 x 0.5 x 2440 MM
25 x 25 x 0.5 x 3660 MM

Application
Designed for horizontal support between the C-stud, helps in electrical switch fitting, fire rated partitions for preventing fires from spreading. Available length: 695/492/390

Dimensions
48 x 40 x 0.5 MM
70 x 40 x 0.5 MM
92 x 40 x 0.5 MM

Application
Galvanized metal bead, having an asymmetric profile with one perforated leg to accommodate jointing material. It is used to protect the exposed and unsupported edges of plasterboard. Also used to form perimeter detail to cover the edges of plasterboard

Dimensions
25 x 10 x 9.5 x 0.5 x 2440 MM           25 x 10 x 12.5 x 0.5 x 2440 MM
25 x 10 x 15 x 0.5 x 2440 MM            25 x 10 x 9.5 x 0.5 x 3660 MM
25 x 10 x 12.5 x 0.5 x 3660 MM         25 x 10 x 15 x 0.5 x 3660 MM

Application
Corrosion resistant self-tapping zinc plated steel screws with countersunk cross-heads, supplied with screw driver bits. To fix plasterboard to metal framework

Dimensions
3.5 x 25 3.5 x 35 3.5 x 50 MM

Application
Corrosion resistant self-tapping zinc plated steel screws with countersunk cross-heads, supplied with screw driver bits. To fix plasterboard to metal framework

Dimensions
3.5 x 25 3.5 x 35 3.5 x 50 MM

Application
Used to connect ceiling section or U section to intermediate channel or tube section respectively

Dimensions
2.64 Ø

Application
Corrosion resistant self-tapping zinc plated steel screws with countersunk cross-heads, supplied with screw driver bits. To fix plasterboard to metal framework

Dimensions
3.5 x 25 3.5 x 35 3.5 x 50 MM